The NanoWipe e-Foam Car Wash Kit makes washing your car easy, effective, and fun with rich, foamy cleaning. The amount of foam you get depends on water temperature, water quality, and how you use the spray bottle. Follow these tips for the best results:
1. Water Temperature Matters
Hot water → lots of foam
Room temperature water → medium foam
Cold water → less foam
For best results, use water above 59–64°F (15–18°C) when mixing the solution.
2. Water Quality Matters
Hard water with high mineral content, common in areas like parts of the Midwest and Southwest, can make foam disappear quickly. Soft or purified water, more typical on the East and West Coasts, produces richer, longer-lasting foam.
High water hardness → weaker foam
Low water hardness → richer foam
If needed, add 1–2 extra bottle caps of solution to reach the desired foam thickness.
3. Using the Spray Bottle Correctly
If the solution sprays out as a stream instead of a fan:
The bottle may not be pressurized properly. Make sure the cap and nozzle are securely attached, then activate the e-sprayer and wait until it reaches full pressure (it will automatically shut off). Press the power button and test the spray.
Over-stirring the solution can create too much foam inside the bottle, causing uneven spraying. Too much foam? Open the cap slowly to release pressure, let it settle, remove a little solution if needed, then gently mix and reseal.
4. Tips for Maximum Foam
Use water above 59–64°F (15–18°C).
Use purified or soft water if possible.
Mix gently—don’t over-stir.
Make sure the spray bottle is properly pressurized before spraying.
Still need help? Create a support request with our customer service team and we'd be happy to help.